DDZ | Interface and Switch Profile in ACI


# INTERFACE & SWITCH PROFILE APIC SETUP : Cisco Application Centric Infrastructure (ACI) is a software-defined networking (SDN) solution designed for data centers. Here, We will create the interfaces and Switch Profile for APIC between two Spine switches, Six Leaf switches and three APIC controller connected to each other.Let's shown as per below mentioned diagram



# INTERFACE & SWITCH PROFILE : Naming switch and interfac profiles consistently will aid troubleshooting by making it esy to understand which interface profile is mapped to which switch profile.
Practical : How to configure the Virtual Port Channel for Switches (Spine's).
: Fabric > Access Policies > Policies > Switch >POE Nodes > Virtual Port Channel default > + Button > Create VPC Explicit Protection Group > Fill the required Wizard (Submit)



# CREATE LEAF INTERFACE PROFILE :
Practical : How to configure the Leaf Interface Profile.
: Fabric > Access Policies > Interface > Leaf Interfaces >Right Click on Profiles > Create Leaf Interface Profiles Wizard > Fill the required Wizard (Submit)



# CREATE LEAF SWICH PROFILE :
Practical :How to configure the Leaf switch Profile.
: Fabric > Access Policies > Switches > Leaf Switches >Right Click on Profiles > Create Leaf switches Profiles Wizard > 1. Profile : Fill the required Wizard (Next) > 1. Associtation : Fill the required Wizard (Finish)



# CREATE ACCESS PORT SELECTOR :
Practical : If you create the access port on any leaf then click on particular Leaf switch.
: Fabric > Access Policies > Interface > Leaf Interface > Profile > Right Click on Created Leaf Interface Profiles (LEAF101) > Create Access Port Selector > Fill the required Wizard as per mentioned below : -














Be updated into yourself and improve lives through DDZ.

Post a Comment

0 Comments